Wheel Type Pile Foundation Long Auger Drilling Rig (Lq360-8)

Basic Info

Model NO.	Lq360-8 Wheel Type Pile Foundation Drilling Rig
Bit Type	Auger
Drilling Way	Rotary
Type	Rotary Drilling Rig
Usage	Pile Foundation Hole
Power Type	Diesel
Transport Package	Export Packing
Specification	360-8
Trademark	LQ
Origin	Changsha, Hunan, China
HS Code	8430490000
Production Capacity	10 Sets/Month

Product Description

1. Wheeled auger using generators, motors integrated design, in addition to the existing hydraulic power as the driving force, but through the installation of the motor, to achieve a job as a power construction, helping users save expenses to the maximum extent, highlight cheap of the machine.

2. Compared to the small hammers, pile foundations, the spiral piling machine to be better meet the requirements of various large-scale infrastructure construction. This machine is applicable to soil, clay, fill soil, silt, silt layer, and some strata contain pebbles, gravel; Widely used in high-speed rail trestle piles, slop shield piles, photovoltaic power station foundation pile, power grids, civil construction, new rural construction, municipal construction, landscaping and other projects.

3. Flexible: machine tonnage of small, simple operation, move quickly, transitions, easy to move.

4. Cost-effective: small acquisition costs, small investment, the effectiveness of large, fast gains.

5. Facilitate disassembly: drill, the host of highly integrated, without disassembly, saving time, fuel and electricity dual (optional), to reduce costs.

LQ360-8 Wheel Type Auger Piling Drilling Rig:

LQ360-8 Wheel Piling Rig	Item	Unit	Data
Vehicle parameters	Dimensions	mm	9500x2100x3050
	Minimum gap	mm	230
	Wheel track	mm	Front 1860,back 1920
	Wheel base	mm	2550
	Upright height	mm	9600
	Telescopic trajectory	mm	650
	Total weight	kg	7300
	Tyre size	/	Front700-16,back750-16
	Travel speed	Km/h	40
	Grade ability	°	25
Diesel engine	Model	/	Quanchai 490
	Power	kw	36
	Rotary speed	r/min	2200
Generator set	Power	kw	40-50
Hydraulic system	Wedge pressure	mpa	16-20
	Outrigger pressure	mpa	16-20
	Max. pressure	mpa	20
	Main pump flow	l/min	32
Working range	Piling hole diameter	mm	100-800
	Piling hole depth	m	8-15
	Drill pipe speed	r/min	40-65
	Drill full force	kn	120
	Rotation angle	°	360
Piling rig performance	1 . on the frame and the next frame can be rotated 360 ° , the frame can slide back and forth 80cm. Working without dead ends. 2 . high piling speed, an average of 3 minutes into a 6m deep hole. 3 . Remote piling can use the remote control, the operation easier. 4 . supports two walk way: Hydraulic power walking and walking (with generators). 5 . vehicle parts, electrical products are based on well-known manufacturers, quality is guaranteed.

Wheel Type Pile Foundation Long Auger Drilling Rig (Lq360-8)

Products

Wheel Type Pile Foundation Long Auger Drilling Rig (Lq360-8)

Basic Info

Product Description